Vendor Unique Message Codes - Quantum LTO 2 User Manual

Sense
Key ASC
Byte 2 Byte 12
0Bh 47h
0Bh 48h
0Bh 49h
0Bh 4Ah
0Bh 4Bh
0Bh 4Dh
0Bh 4Eh
0Bh 5Ah
0Dh Volume Overflow
0Dh 00h
Vendor Unique Message
Codes
LTO-2 SCSI Interface Guide
ASCQ
Byte 13 Message
00h SCSI parity error
00h Initiator detected
error message
received
00h Invalid message
error
00h Command phase
error
00h Data phase error
NNh Tagged overlapped
commands (NN =
Queue Tag value)
00h Overlapped
commands
attempted
01h Operator medium
removal request
02h EOM detected
The table in appendix A, Message Codes
codes that are returned in the Field Pointer field (bytes 16-17) when the
2
SKSV bit is 0.
Chapter 2 SCSI Commands
REQUEST SENSE Command
Explanation
A command failed because an Initiator
Detected Error message was received.
The command failed because an invalid
message was received by the drive.
A command could not be executed because
too many parity errors occurred in the
Command phase.
A command could not be completed
because too many errors occurred during
the Data phase.
An initiator sent the drive a new command
even though it already had a command
with the same Task ID outstanding in the
drive.
An initiator selected the drive even though
it already had a command outstanding in
the drive.
The command was aborted because the
eject button was pressed.
A or
WRITE WRITE FILEMARKS
failed because the physical end of tape was
encountered. The EOM flag will be set.
lists the vendor unique message
command
241