Quantum LTO 2 User Manual page 165

LTO-2 SCSI Interface Guide
Field Bytes
EWasc 2
DExcept 2
Test 2
LogErr 2
MRIE 3
Interval 4-7
Timer
Bits Description
4 Always 1, indicating that Tape Alert
warning flags are reported.
3 0 = Exception reporting is enabled.
1 = Exception reporting is disabled
(default).
2 0 = Normal operation (default).
1 = Fail next command with (see
):
Note
01/5D/FF if Test Flag Number is 0.
01/5D/00 if Test Flag Number
indicates a valid value (see
This will be reported only one
Note:
time between resets. Test bit
and Test Flag Number are
cleared right away after the
MODE SELECT
displayed as 0s in
SENSE
0 Always 0, indicating that this feature
is not supported.
0-3 Always 3, so if an exception occurs,
the next command (except
and
REQUEST SENSE
condition status and the Sense Key
will be set to Recovered Error (01) and
the Additional Sense will be set to
Failure Prediction Threshold
Exceeded (5D00).
Always 0, indicating that this feature
is not supported.
Chapter 2 SCSI Commands
MODE SELECT Command
Note
and are
MODE
.
INQUIRY
) will get check
).
141