Completion Status; Table 45 Inquiry Command Completion Status - Quantum LTO 2 User Manual

Completion Status

Table 45 INQUIRY Command
Completion Status
LTO-2 SCSI Interface Guide
Table 45 shows the completion codes and messages for the
2
command.
Code Message
00h Good Status
02h Check
Condition
Chapter 2 SCSI Commands
Description
• The tape is not moved; the current
position is maintained.
• The drive remains in any previously
set modes.
• The drive is ready to perform any
appropriate command.
Use the
REQUEST SENSE
retrieve status information. Possible
Sense Keys are:
Code Message
04h Hardware
Error
05h Illegal
Request
INQUIRY Command
INQUIRY
command to
Description
Parity error on
the SCSI bus or
drive hardware
failure.
The Command
Descriptor Block
is invalid.
61