Table of Contents
Advertisement
The PDC Configuration screen is displayed on your phone screen.
3. On the PDC Configuration screen, set the Status field to Enabled and select Save.
Your settings are saved and the Basic screen is displayed.
4. On the PDC Configuration screen, select Reconnect.
A dialog box is displayed on your phone screen asking if you wish to share your remote keyboard
and mouse.
5. Select Yes
A dialog box is displayed asking you to specify your phone's position.
6. Specify whether your phone is to the left or right of your computer monitor.
A dialog box is displayed on your computer asking to allow remote control of your phone.
7. Click OK to complete the setup process.
The PDC icon turns red, shown next, indicating that you have successfully enabled the PDC
program.
Using the Indirect Method
If your phone and computer are connected through a switch, use the indirect method to enable the PDC.
This method requires you to find your computer's IP address and manually enter your computer access
credentials.
Find Your Computer's IP Address
You can find your computer's IP address using the Command Prompt on your computer.
Procedure
1. Click Start > All Programs > Accessories > Command Prompt.
2. In the Command Prompt, type ipconfig and press Enter.
3. Note your server address on the IPv4 Address line, as shown next.
Polycom, Inc.
All manuals and user guides at all-guides.com
Phone Accessories and Computer Applications
124
Advertisement
Table of Contents
