Handling Security Notice Alerts - Polycom ReadiManagerLX100 Software Manual

Polycom ReadiManager LX100 Lotus Notes Scheduling Guide

Handling Security Notice Alerts

52
8. Change the template name to VideoMeeting.
9. Click the Close box to close the dialog.
10. Open the database (double click on it).
11. Choose File > Database > Refresh
12. Under Server, select your server.
13. Click Replace.
14. When asked to confirm, click Yes.
To assign the VideoMeeting template to the Standard Mail Template for all
users
Note:
Be careful when using this procedure. It will effect the mail database for all users.
1. Open Administrator.
2. Right-click the standard mail template
Properties.
3. Click the Design tab (T-Square).
4. Uncheck Database entry is a master
5. Click the close box to close the dialog box.
6. Right-click the Polycom ReadiManager LX100 template
pcs.ntf) and choose Properties.
7. Click the 'Design' tab (T-Square).
8. Change the template name to that of the standard mail template (StdR6Mail).
Whenever database designs are refreshed, the database will use the
VideoMeeting Template. (Designs are refreshed by opening the database and
choosing File > Database > Refresh Design.)
The Polycom ReadiManager LX100 component uses ActiveX controls. As a result,
when you use Polycom ReadiManager LX100 features to create and manage video
conferences, Lotus Notes may display Security Alerts.
Users can minimize the display of these notices by following the steps below.
Administrators can also sign the Polycom database to minimize these messages. For
Design.
(Mail (R6) or mail6.ntf)
template.
(VideoMeeting
Handling Security Notice Alerts
and choose
or