Changing How The Connection Is Made; Setting The Connection Type For Individual Resources - Polycom ReadiManagerLX100 Software Manual

Changing How the Connection is Made

Setting the Connection Type for Individual
Resources
© Polycom, Inc.
Some resources can be connected to in more than one way. Connection methods
include Dial-In, ISDN, IP, and a Direct connection to an MCU.
The methods available for a given endpoint appear in the Connect Using menu. You
can change the method to be used when scheduling the resources.
To select a different connection method
>> Right-click on the desired resource in the Selected Resources box of the
Conference Resources window and choose
A check mark shows the current method.
To use a different connection method, select it from the list.
You can set the type of connection to be used by individual conferences. The settings
you can select are determined by the type of conference selected in the Advanced
Settings. Available choices may include:
None. Use this setting to indicate that only the room is being reserved. When None
is the only available selection, "Rooms Only" is selected as the Conference Type.
Bridged Audio. Use this setting to have an MCU create a dial-in number for this
endpoint. When None and Bridged Audio are the only available setting, "Bridged
Audio Only is selected as the Conference Type.
128, 256, 320, 384, etc. video. Use these settings to specify a particular
connection speed for this endpoint. When these settings are available,
"Video/Audio" is selected as the Conference Type.
Chapter 1 - Videoconference Features in Lotus Notes
Connect Using.
25