Mitsubishi Electric MELSEC iQ-R Series User Manual page 229

Remote password function monitoring area
■ Auto-open UDP port continuous unlock failure count (Un\G2108800, Un\G4205952)
The mismatch count of remote password at unlock of the auto-open UDP port is stored. The count is cleared when the
password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■ MELSOFT transmission port (UDP/IP) continuous unlock failure count (Un\G2108801,
Un\G4205953)
The mismatch count of remote password at unlock of the MELSOFT transmission port (UDP/IP) is stored. The count is
cleared when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■ MELSOFT transmission port (TCP/IP) continuous unlock failure count (Un\G2108802,
Un\G4205954)
The mismatch count of remote password at unlock of the MELSOFT transmission port (TCP/IP) is stored. The count is
cleared when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■ SLMP transmission port (UDP/IP) continuous unlock failure count (Un\G2108805,
Un\G4205957)
The mismatch count of remote password at unlock of the SLMP transmission port (UDP/IP) is stored. The count is cleared
when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
■ SLMP transmission port (TCP/IP) continuous unlock failure count (Un\G2108806,
Un\G4205958)
The mismatch count of remote password at unlock of the SLMP transmission port (TCP/IP) is stored. The count is cleared
when the password matches.
Range: 0 to 65535 (Values of 65535 or more are not changed)
Network type information area (Network type information)
■ Network type information area (Network type information) (Un\G2162687)
5: CC-Link IE TSN
Ethernet P1/2 common information
■ Initial status (Un\G6291480)
The initial processing status of the Ethernet connection of the Motion module is stored.
[b0]: Initial normal completion status
• 1: Initialization normal completion
• 0: 
[b1]: Initial abnormal completion status
• 1: Initialization abnormal completion
• 0: 
[b2 to b15]: Not used (Use prohibited)
■ Initial error code (Un\G6291481)
The information when the initial processing is completed with an error is stored.
• 1 or more: Initialization abnormal code
• 0: In initial processing or initial normal completion
Appendix 1 Buffer Memory (When Using the PLCopen Motion Control FB Mode)
A
APPX
227