Mitsubishi Electric MELSEC iQ-R Series User Manual page 103

Item Description
1 to 256 Link Side Set the link refresh ranges of link devices (RX, RY, RWr, RWw, LB,
LW). Up to 256 ranges can be set. (Page 100 Refresh Settings)
Ex.
00000H
·
000FFH
00000H
·
003FFH
00000H
·
00013H
00000H
·
0001FH
CPU Side 00100H
·
001FFH
00100H
·
001FFH
Motion module
The link device of the Motion module can be accessed from the program as well. (Page 33 Direct access
to link devices)
Precautions
■ Devices to be set to "CPU Side"
Set a device range not to overlap the one used for the following:
• "Refresh Setting" of "Basic Settings" of other network modules
• "Refresh Setting" of "Basic Settings" of the CC-Link master/local module
• I/O numbers used for I/O modules and intelligent function modules
• "Refresh Setting" of the intelligent function module
• Module label used (When the refresh setting is configured in "Refresh Setting" of "Basic Settings")
• "Refresh Setting between Multiple CPUs" of "CPU Parameter" of the multiple CPU system
■ Link refresh range
Set only link devices used in the CPU module for link refresh range. Doing so will reduce the number of excess points,
resulting in a shorter link refresh time.
■ When the assignment of the link device is changed in "Network Configuration Settings" of
"Basic Settings"
Correct the setting range of "Refresh Setting" of "Basic Settings".
No.1
No.2
No.3
No.4
LB B
LW W
CPU module
Setting range
■Device Name
• RX, RY, RWr, RWw, LB, LW
(Default: empty)
■Points
• RX, RY: 16 to 16384
• RWr, RWw: 4 to 8192
• LB: 16 to 32768
01000H
• LW: 1 to 16384
·
(Default: Grayout)
010FFH
■Start
• RX, RY: 0000H to 3FF0H (set in increments of 16 points)
01000H
• RWr, RWw: 0000H to 1FFCH (set in increments of 4 points)
·
• LB: 000FH to 7FF0H (set in increments of 16 points)
013FFH
• LW: 0000H to 3FFFH (set in increments of 1 point)
00000H
(Default: Grayout)
·
■End
• RX, RY: 000FH to 3FFFH (set in increments of 16 points)
00013H
• RWr, RWw: 0003H to 1FFFH (set in increments of 4 points)
00100H
• LB: 000FH to 7FFFH (set in increments of 16 points)
·
• LW: 0000H to 3FFFH (set in increments of 1 point)
(Default: Grayout)
0011FH
00000H
■Target
• Specify Device
·
(Default: Grayout)
000FFH
■Device Name
00200H
• Specify Device (link side is RX): X, M, L, B, D, W, R, ZR,
·
RD
• Specify Device (link side is RY): Y, M, L, B, D, W, R, ZR, RD
002FFH
• Specify Device (link side is RWr, RWw): M, L, B, D, W, R,
ZR, RD
• Specify Device (link side is LB, LW): X, Y, M, L, B, D, W, R,
ZR, RD
(Default: Grayout)
■Points, End
• For a specified device: Displayed corresponding to the
setting of "Start".
(Default: Grayout)
■Start
• For a specified device: Device range of CPU modules (Set
bit devices in increments of 16 points and word devices in
increments of 4 points.)
(Default: Grayout)
2 PARAMETER SETTINGS
2.3 Basic Settings
2
101