Command execution to device stations
Commands to a device station (Error clear request, Error history clear request) are executed.
When performing the command execution to the main module to which the extended module is connected,
use the following module.
• Motion module whose Add-on baseSystem version is "1.16" or later
Navigation window "Parameter" "Module Information" Target module "Module Parameter (Network)" "Basic
Settings" "Network Configuration Settings" <Detailed Setting>
In this manual, "Slave station" is written as "Device station".
Select and right-click the device station, select "Command Execution of Device Station" from "Online" to display the
"Command Execution of Device Station" window.
In this manual, "Slave station" is written as "Device station".
2 PARAMETER SETTINGS
2.5 "CC-Link IE TSN Configuration" Window
2
123