Table of Contents
Advertisement
HM 1000/1250
4) If the table settles down with no problem, check the table bolt places if they are aligned
properly. If not, insert two bolts into the cylinder cap as shown and use the pipe to rotate
the cylinder so that it fits into the bolt holes. Then, tighten the table bolts.
▪ 12-BB16×60
Cylinder
Cap
5) Remove the plugs (2-FPS-S1/2) on the table
deck and loosen the bolts (2-BB10×35).
▪ The bolt is designed specifically for the table
precision work.
Plug
6) Lift up C12051171A clamp plate and put it
down on the table in the right direction with
care. Then, tighten the bolts.
▪ 6-BB16×60
64
Bolt
12-Table
Fixing Bolt
Plug
Clamp Plate
HM1000ISE99
Fixing Bolt
Advertisement
Table of Contents
