Table of Contents
Advertisement
HM 1000/1250
7) Lift up the table gently.
▪ It is very important to balance the table while lifting it up. Using the wood support or
lead piece may help for this purpose.
8) Then, move the table to a safe place and keep it upside down.
9) Adjusting the curvic coupling of the table base
body
① Loosen the bolts (12-BB16×40) on the
curvic coupling.
② Use the pin puller to remove the curvic
coupling positioning pins (2-TPB13×50) and
check if they are normal.
③ Perform the reaming on the pin hole again
before inserting a new pin.
④ Tighten up the bolts (12-BB16×40) for the curvic coupling.
62
Curvic
Coupling
Fixing Bolt
Positioning
Pin
HM1000ISE99
Advertisement
Table of Contents
