Table of Contents
Advertisement
HM 1000/1250
5) When the leveling is completed, use a 58mm wrench to tighten up the level-bolt fixing
nuts.
※ Importance of the level-bolt fixing nut
The anchor nut can be fixed only using the level bolt. Tightening the level-bolt fixing
nut is to fix the level bolt to the bed of the machine, resulting that the machine is fixed
by the anchor. Therefore, if you do not tighten the nut, the anchor fails to fix the
machine but the level bolt is fixed, resulting in a gap from the level bolt as much as
the backlash.
※ Install C12041173A bed cover on the deck of the table bed and column bed assembly in
advance of the splash guard.
▪ If you install the splash guard first, you may encounter a problem in closing the bed
cover.
Bed Cover
HM1000ISE99
Bed Cover
41
Advertisement
Table of Contents
