HM 1000/1250
④ Plug the glass scale connectors (optional)
⑤ Plug the connectors for the tool length
meter (Optional)
8) Installing the Y-axis servo motor and connecting the cables
① Lift up the Y-axis servo motor using the crane. While keeping it balanced, place it
down on the motor bracket in the column before installation. Then, tighten the fixing
bolts.
▪ Insert the coupling installed on the servo motor axis slightly into the ball screw.
Coupling
② Connect the power cable, feedback cable
and motor brake cable of the servo motor.
HM1000ISE99
29