Replacing A Cf Card - H3C SR6604 Installation Manual

Figure6-8 Replacing a HIM/MIM/MIC/MIC-X
3. If you do not install a new HIM/MIM/MIC/MIC-X in the slot, install a filler panel. To install a new
HIM/MIM/MIC/MIC-X, see

Replacing a CF card

CAUTION:
To avoid hardware damage, do not remove the CF card when the router is booting or the CF LED is
flashing.
To replace a CF card:
1. Make sure the CF card LED is not flashing. A flashing CF card LED means that the system is
accessing the CF card.
To replace the CF card on the MCP, remove the CF card cover first.
2. As shown in Figure6-9, press the CF card eject button of the CF card reader so that the eject
button protects from the panel.
Figure6-9 Pressing the eject button
3. Press the eject button again to eject the CF card part-way out of the CF card reader, and then
pull the CF card out of the CF card reader.
"Installing a HIM/MIM/MIC/MIC-X interface
64
module."