H3C SR6604 Installation Manual page 36

6. Connect the other end of the DC power cord to the DC power source.
7. Install the protection cover of the DC power supply.
Figure2-28 Connecting the DC power cord
Connecting the power cord for the PSR1200-D
Figure2-29 DC power cord
To connect the DC power cord:
1. Loosen the captive screws on the power supply to remove the power supply connector.
2. Connect the end marked with "–" to the negative terminal (–) on the power supply and fasten
the screw.
3. Connect the end marked with "+" to the positive terminal (+) on the power supply and fasten the
screw.
Figure2-30 Attaching the power cords to the power supply connector
+
-
28