H3C SR6604 Installation Manual page 93

Booting Normal Extend BootWare........
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
cfa0 Size
BASIC CPLD Version
EXTEND CPLD Version : 133.0
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
2. Press Ctrl + B
prompt message appears.
BootWare password: Not required. Please press Enter to continue.
3. Press and read the password recovery capability state message displayed before the
Enter
EXTEND-BOOTWARE menu.
Password recovery capability is enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
H3C SR66 BootWare, Version 7.1.064
: Apr 6 2017
: XLS408
: 32KB
: 1000MHz
: DDR2 SDRAM
: 2048MB
: 533MHz
: 1024KB
: 4MB
: 244MB
: 131.0
: Ver.B
within three seconds after the "Press Ctrl+B to enter extended boot menu..."
8-85
*
*
*
|
|
|
|
|
|
|
|
|
|