Replacing A Cf Card - H3C S7500E Series Installation Manual

Figure 55 Remove an air filter for the other models
1: Loosen the captive screw on the air filter

Replacing a CF card

NOTE:
• Before replacing a CF card, execute the umount command to unmount the CF card to ensure that the file
system on the CF card is not damaged when you remove the CF card.
After you execute the umount cf command, if you want to continue to use the CF card, execute the
•
mount cf command in user view to load the CF card again.
After you replace the CF card, the system automatically loads the CF card.
•
Follow these steps to replace a CF card:
Log in to the switch to execute the umount command. For how to log in to the switch, see the chapter
Step1
"Connecting your switch to the network."
Press the eject button of the CF card reader as shown in callout 1 of
Step2
part way out of the slot.
Remove the CF card from the reader and put it in an antistatic shielding bag.
Step3
Install a new CF card. For the installation procedures, see the chapter "Installing modules."
Step4
2: Pull the air filter out of the chassis
100
Figure 56. The reader ejects the card