Connecting a T1 cable
1.
Connect the D68 connector of the 8-port T1 cable to the D68 interface on the interface module
and fasten the bolts to fix the cable.
2.
The other end of the cable provides eight RJ-45 connectors. Connect them to the RJ-45
interface on the remote device as needed.
Figure4-20 Connecting an 8T1 cable
T1 / T1-F
Connecting a CE3/CT3/T3 cable
CE3/CT3/T3 cable overview
You can use a CE3/CT3/T3 interface cable to connect the MIM-1CE3, MIM-1CT3, and MIM-1T3-V2
modules.
Figure4-21 E3/T3 cable
BNS
connector
As a best practice, install a special lightning protector at the input end of the E3/T3 cables to protect
them against lightning strikes more efficiently when they are routed outdoors.
Connecting a CE3/CT3/T3 cable
1.
Connect the SMB connector of an E3/T3 cable to the Tx port on the interface module and the
other end to the Rx port on the device to be connected.
2.
Connect the SMB connector of another E3/T3 cable to the Rx port of interface module and the
other end to the Tx port on the device to be connected.
8T1 interface cable
47
Device
(RJ45 Port)
SMB
connector