Replacing A Mim; Replacing A Cf Card - H3C SR6602-X1 AC Installation Manual

Figure 54 Pulling the HIM out of the slot
If you do not install a new HIM in the slot, install a blank panel. To install a new HIM, see
3.
"Installing a

Replacing a MIM

NOTE:
To replace a MIM module when the router is running, perform the remove slot slot-number
command and then unplug the module.
To replace a MIM:
Determine the MIM to be removed. Use a flat-blade screwdriver to completely loosen the
1.
captive screws of the MIM to be removed.
Holding the handle of the MIM, gently pull the MIM out of slot along the slide rails.
2.
Figure 55 Pulling the MIM out of the slot
If you do not install a new MIM in the slot, install a blank panel. To install a new MIM, see
3.
"Installing a

Replacing a CF card

CAUTION:
• To avoid hardware damage, do not remove the CF card when the router is booting or the CF LED
is flashing.
• Before you replace a CF card, open the CF card cover first. For more information, see
a CF card."
HIM."
MIM."
41
"Installing