Extron electronics PowerCage 411 Series User Manual page 26

USB configuration port (see
D
device to the front panel USB mini-B port for configuring the enclosure.
NOTES:
• This port allows communication to the enclosure and the boards.
The front panel USB port is hardcoded with the IP address 203.0.113.22,
•
which cannot be changed.
LCD screen — The screen displays messages, menu information, and your selections
E
(see Front Panel LCD Menu Overview
Reset button and LED — This button is used to reset the enclosure to any one of
F
three different states. The LED indicates the status during the procedure. Refer to the
Resetting the PowerCage 411 Enclosure with the Reset Button
details. The LED blinks when the Reset button is held down.
NOTES:
• Pressing the Reset button only affects the enclosure and not the slot devices.
• The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron (see
page 58 to change a password).
Navigation buttons —
G
• Press MENU to access the PowerCage 411 menu system (see
Menu Overview).
From each menu press NEXT to step through submenus (see
•
Menu Overview).
Navigation knobs —
H
Horizontal adjust knob ([) — Using the menu system, rotate this knob to scroll
•
through the menu and to make any adjustments (see
Overview).
• Vertical Adjust knob ({) — Using the menu system, rotate this knob to scroll
through the menu and to make any adjustments (see
Overview).
figure 12 on page 17) — If desired, connect a host
on page 22).
Front Panel LCD Menu
Front Panel LCD Menu
PowerCage 411 Series • Operation
on page 20 for
Passwords Panel on
Front Panel LCD
Front Panel LCD
18