Table of Contents
Advertisement
Front Panel LCD Menu Overview
When the PowerCage 411 is first connected to a power source, the LCD screen displays
two initial screens, which contains the product name, model, part number, and firmware
version. This is followed by the default cycle of screens showing the current configuration
of the four slots. These messages continue to cycle on the LCD screen when the menu
system is not in use. The following flow diagram shows the order in which these screens
appear.
EXTRON
Power
POWERCAGE411
On
60-1492-02
FW V1.00.xxx
SLOT #1
FOX3 T 301
Figure 15.
NOTE: From any menu or submenu, the PowerCage 411 saves all adjustment settings
Menu Navigation
1.
2.
3.
4.
5.
Menu System Overview
The PowerCage 411 menus enable configuration of the enclosure and the transmitter
boards. The menu navigation buttons (MENU and NEXT) are located to the right of the LCD
screen. Press these buttons to cycle through the available menu and submenu options.
The PowerCage 411 menu system consists of a main menu with four options (menus).
Each of these four menus has a set of submenus, which enable the user to make desired
adjustments (see the diagram for the
The transmitter menu system contains configurable settings and status indicators for the
FOX3 PC transmitters only (see
Default Cycle
SLOT #2
N/A
Default Cycle Example
and times out to the default screens after 30 seconds of inactivity.
From the root menu, press the MENU button to select the desired slot.
Press the NEXT button to open the slot menu for the selected slot.
For each submenu with adjustable values, rotate the Vertical adjustment knob to
select the desired value.
Press the NEXT button to cycle through device submenus.
Press the MENU button to return to the root menu.
SLOT #3
SLOT #4
FOX3 T 311
FOX3 T 201
PowerCage 411 Menu
Transmitter Menu
starting on page 28).
PowerCage 411 Series • Operation
SLOT MENU
MENU
on page 24).
22
Advertisement
Table of Contents
