Table of Contents
Advertisement
TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through Ethernet or IP over USB.
Figure 29.
To connect to an online device or re-establish a connection via the LAN port:
1.
Click the TCP/IP tab (see figure 30,
2.
In the IP Address/Hostname field (
•
If connecting via the LAN Ethernet port:
NOTE: If the IP address has not been changed, it is 192.168.254.254.
•
If connecting via the front panel USB mini-B port:
NOTE: The IP address is 203.0.113.22. This IP address cannot be changed.
3.
Enter the device password in the Password field (
NOTES:
•
•
4.
In the Port field (
for the port to connect.
5.
Click the Connect button (
TCP/IP Panel
Select the Show Password check box (see
characters.
The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron (see
page 58 to change a password).
), enter the port of the desired device or allow the device to search
4
). A new device tab opens.
6
PowerCage 411 Series • Configuration Software
).
1
), enter the IP address of the desired device.
2
).
3
) to display the password
5
Passwords Panel
on
48
Advertisement
Table of Contents
