Table of Contents
Advertisement
System Compatibility
FOX3 endpoints with the Uncompressed Video LinkLicense passes uncompressed
4K @ 60 Hz video signals to FOX3 endpoints that also have the Uncompressed Video
LinkLicense.
NOTE: The FOX3 products are not compatible with legacy FOX, FOXBOX, FOX II,
Control Methods
To configure and control the enclosure or transmitter use one of the following methods:
•
•
•
NOTES:
Extron LinkLicense
An Extron LinkLicense unlocks features that add convenience, expand system options, and
enhance the capabilities of Extron products. Each LinkLicense can be purchased separately
from the FOX3 device and activated as the need arises. A LinkLicense can be uploaded
using Extron Toolbelt software (see Toolbelt Help File for details and
Installation
NOTE: A user must have an Insider Account to download and use ToolBelt Software.
LinkLicense upgrades available for the FOX3 transmitter and receiver include the following:
Uncompressed Video Upgrade —
•
•
PowerCage 401 FOX, or PowerCage 1600 FOX products. For a list of compatible
products, go to www.extron.com.
Enclosure menu system (see
SIS commands (see
SIS Configuration and Control
Extron Product Configuration Software (see
page 45)
•
To configure and control the enclosure, see the PowerCage 411 Series PCS Help
File available in the PCS module.
•
An Extron Insider account is required to download and use Product Configuration
Software (PCS). Contact an Extron support representative, to obtain an Insider
Account.
on page 45 to download Toolbelt).
Contact an Extron support representative, to obtain an Insider Account.
This LinkLicense is enabled once and lasts for the life of the product.
Allows the FOX3 endpoints to pass uncompressed 4K @ 60 Hz video on the second
SFP module, enabling the highest video performance.
PowerCage 411 Menu
starting on page 24)
starting on page 31)
Configuration Software
PowerCage 411 Series • Introduction
starting on
Software/Firmware
3
Advertisement
Table of Contents
