Table of Contents
Advertisement
Network Panel
In the Network panel (see figure 41,
the IP address, subnet mask, gateway address, search domain name, and MAC address for
the PowerCage, or turn DHCP On and Off.
To change the name:
Click EDIT in the Network panel. The editable fields
1.
are displayed (see figure 48).
2.
Edit the Device Name / Hostname as desired.
3.
When finished editing, click SAVE to confirm your
changes or CANCEL to close the window without
making changes.
To set the IP addresses:
Click EDIT in the Network panel. The editable fields
1.
are displayed (see figure 48).
2.
Edit the network settings as desired:
a.
Click the DHCP switch to toggle DHCP on and off.
When DHCP is enabled (On), the unit configures
its IP address and other network settings from the
DHCP server. The default is Off.
b.
To set any of the addresses: IP Address, Subnet
mask, and Gateway address, click in the desired
field and enter the address.
3.
When finished editing, click out of the field and click
SAVE to confirm your changes or CANCEL to close the
window without making changes.
Passwords Panel
The Passwords panel (see figure 41,
have been set and provides an option to set administrator or user passwords. It does not
display the actual password.
NOTE: The following rules apply to passwords:
•
Length is 1-128 characters.
•
All human-readable characters are permitted except |.
The password cannot be a single space.
•
•
Passwords are case-sensitive.
•
If the Admin or User password is cleared, the password defaults to extron.
•
The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron for the Admin and User.
on page 55), change the device name and edit
8
Figure 47.
) displays whether Admin and User passwords
9
PowerCage 411 Series • Internal Web Page
Network Panel
58
58
Advertisement
Table of Contents
