Extron electronics PowerCage 411 Series User Manual page 47

Command
PowerCage 411 Enclosure Commands Continued
Power I/O slot
Enable or disable 12V on
individual slot
View 12V power slot status
X!
KEY:
= Slot number
X^
= Enable/disable
Reboot system
Reboot system
Restart network
NOTE:
Changes made to IP Address, Subnet Mask, DHCP, and/or Gateway Address do not take effect until the
is issued, except for changes made via the CISG command (which takes place immediately and does not require rebooting).
Password and security settings
NOTES:
•
A user password cannot be assigned if no admin password exists, returns E14. If an admin password gets cleared, then the
user password is also removed.
•
The factory configured passwords for all accounts on this enclosure have been set to the enclosure serial number. In the event
of a complete system reset, the passwords convert to the default, which is extron.
Set administrator password
View administrator password
Reset administrator password
Set user password
View user password
Reset user password
X1%
KEY:
= Password
Device name
Set device name
Reset device name
View device name
X$
KEY:
= Text string up to 63 characters drawn from the alphabet (A-Z), digits (0-9), minus sign/hyphen (-). No blank or space
X%
= Default name
ASCII Command Response
(host to PowerCage) (PowerCage to host)
E X! X^ }
S * POWR PowrS
E X! } X^]
S POWR
Verbose mode 2/3
PowrS
1 to 4
0 = Disable 1 = Enable (default)
E }
1BOOT Boot1
E }
2BOOT Boot2
E X1% }
CA Ipa
E } X1%]
CA
Ipa
Verbose mode 2/3
E • }
CA Ipa
E X1% }
CU Ipu
E } X1%]
CU
Ipu
Verbose mode 2/3
E • }
CU Ipu
Up to 12 digits and alphanumeric characters (no / \ | * or space ). If there is a valid password,
]
the response is **** . If there is no password, the response is
E X$ }
CN Ipn
E •
}
CN Ipn
E X% ]
}
CN
characters are permitted as part of a name. No distinction is made between upper and lower case.
The first character must be an alpha character. The last character must not be a minus sign/hyphen.
Combination of model name and last 3 pairs of MAC address.
Additional Description
X! X^]
Enable or disable 12V power on slot
*
X^]
]
]
• X1%]
]
or
• X1%] • ]
or
Ipa
• ]
• X1%]
]
or
• X1%] • ]
or Ipu
• ]
• X$ ]
• X% ]
PowerCage 411 Series • SIS Configuration and Control
2B T
OO command
]
.
X!
.
39