Hdcp Authorized Submenu; Audio Selection Submenu; Input Detection Submenu; Test Pattern Submenu - Extron electronics PowerCage 411 Series User Manual

Modular power enclosure and fiber optic extenders
Table of Contents

Advertisement

Resolution
1
720p 2-CH
2
1080p 2-CH
3
1920x1200 2-CH
4
4K/UHD 2-CH
5
4K/UHD 2-CH
6
Output Slot/Display Connected to Receiver Output 1
7
Output Slot/Display Connected to Receiver Output 2
8
Store Slot/Imported 1
9
Store Slot/Imported 2
NOTE: By default, the user slots have a resolution 1080p @ 60 Hz and 2Ch audio.

HDCP Authorized Submenu

In the HDCP AUTHORIZED submenu enable or disable the HDCP Authorized feature for the
input. Rotate the vertical Adjust knob ({) to select one of the following:

Audio Selection Submenu

In the AUDIO SELECTION submenu select the input audio to send over the corresponding
fiber output for the input. Rotate the vertical Adjust knob ({) to select a specific input to
transmit or set the transmitter to automatically pick one.

Input Detection Submenu

In the INPUT DETECTION submenu the resolution and format is displayed for the selected
input. The information is displayed in the same format as the EDID (see
page 28).

Test Pattern Submenu

In the TEST PATTERN submenu select the test pattern. The submenu can be set to OFF or
COLOR BARS.
EDID Settings
ON — Reports the digital input as an HDCP-authorized sink to the source. Use this
submenu for devices that require encryption. If HDCP Authorized is disabled for sources
that require encryption (for example, a Blu-ray player), the output is muted.
OFF — Does not report the digital input as an HDCP-authorized sink to the source.
Use this submenu for sources that encrypt their output even if the source material
does not require HDCP encryption, preventing content from displaying on a non-HDCP
compliant display. Disabling the HDCP Authorized feature allows the output to remain
unencrypted.
AUTO — Sends audio based on availability. If both audio inputs are available, the
transmitter prioritizes digital audio from the HDMI input.
ANALOG — Sends analog audio from the analog audio input.
DIGITAL — Sends digital audio from the HDMI input.
Refresh Rate
60 Hz
60 Hz
60 Hz
30 Hz
60 Hz
Automatically populated with EDID from sink device
Automatically populated with EDID from sink device
Manually populated by user/PCS
Manually populated by user/PCS
PowerCage 411 Series • Operation
EDID Submenu
on
29

Advertisement

Table of Contents
loading

Table of Contents