Input Hdcp Submenu; Audio Input Submenu; Sfp Status Submenu; Temperature Submenu - Extron electronics PowerCage 411 Series User Manual

Input HDCP Submenu

In the INPUT HDCP submenu the HDCP status of the HDMI input is displayed. The submenu
displays one of the following:
• HDCP — Indicates the selected input is HDCP-compliant.
NON HDCP — Indicates the selected input is not HDCP-compliant.
•

Audio Input Submenu

In the AUDIO INPUT submenu the signal status of the audio input for the selected input is
displayed. The submenu displays one of the following:
• DETECT — Indicates the selected input contains audio.
• NOT DETECT — Indicates the selected input does not contain audio.

SFP Status Submenu

In the SFP IN STAT submenu the light detection status for each input is displayed. The
submenu displays one of the following for port A and port B:
• MM — Indicates a multi-mode SFP model is installed in the selected input.
• SM — Indicates a single-mode SFP model is installed in the selected input.
INV — Indicates an invalid SFP model is installed in the selected input.
•
• OFF — Indicates no SFP model is installed in the selected input.

Temperature Submenu

In the TEMPERATURE submenu the board temperature in degrees Fahrenheit and Celsius is
displayed.

Transmitter Factory Reset Submenu

In the TX Reset submenu, reset the configurable settings of the transmitter to the factory
default values. To activate the factory reset, press and hold the MENU button for 5 seconds.
This is the same as the ZXXX SIS command (see Resets on page 38).
PowerCage 411 Series • Operation 30