Table of Contents
Advertisement
Modules Page
Access the Modules page (see figure 52) by clicking the Modules tab (see figure 41,
on page 55) in the left hand column. There are four card slots: slot 1, slot 2, slot 3, and
slot 4. The Device Type of each card slot is the model name of the installed card or (-) if
no card is installed. Install firmware and view any LinkLicense installed on each card.
Figure 51.
To update the card firmware:
1.
Click Install Firmware (see figure 52)
in the selected slot row. The Install
Firmware dialog box opens (see
figure 53).
2.
Click the SELECT FILE button (see
figure 53). The Open dialog box opens.
In the Open dialog box, browse to locate
3.
the new firmware file on your computer.
Valid firmware files have an .eff
extension.
4.
Select the file and click the Open button.
The file loads to the Install Firmware
dialog box (see figure 54).
5.
Click the INSTALL button. The Install
Firmware dialog box closes.
NOTE: To upload firmware to multiple
devices, select the checkbox in the first
column of the desired devices and follow
steps 1 through 4.
To cancel pending changes:
Click the Cancel button. The dialog box
closes.
Modules Page
Figure 52.
Install Firmware Dialog Box
Figure 53.
Install Firmware Dialog Box
PowerCage 411 Series • Internal Web Page
2
60
60
Advertisement
Table of Contents
