Extron electronics PowerCage 411 Series User Manual page 45

X4& = Output HDCP status
X4* = Input audio selected
X4( = Device type
X5) = Enable DHCP
X5! = Input HDCP Authorization
X5@ = Force 4K60 compressed
mode
X5# = Active fiber link
X5$ = Fiber link detection
X5% = Resolution and refresh rate nnnnHorizontalxnnnnVertical@xxHz
X5^ = Detected audio input format 0 = Not detected,
X5& = Detected Video input color
space format
X5* = Detected pixel clock
X5( = View audio output
0 = No active sink detected
1 = Sink detected, output encrypted
2 = Sink detected, output not encrypted
0 = Auto, 1 = Digital,
TX or RX
0 = Off (default), 1 = On
0 = HDCP authorized off,
0 = Disable (default; after a reset, setting defaults back to 0)
1 = Force 4K60 on 1 fiber
1 = SFP A, 2 = SFP B
0 = Not Detected 2 = Detected
(example: 3840x2160@59.9Hz)
(0000x0000@000Hz = no input detected)
1 = Digital,
0 = Not detected, 1 = YUV,
4-digit response with 0 padding (example: 297 = 0297MHZ)
(0000 = No pixel clock detected)
1 = Digital, 2 = Analog
PowerCage 411 Series • SIS Configuration and Control
2 = Analog
1 = HDCP authorized on (default)
2 = Analog
2 = RGB
37