Frame Status Menu - Extron electronics PowerCage 411 Series User Manual

Frame Status Menu

The FRAME STATUS menu displays
enclosure information: the firmware
version, status of the power
supplies, fan speeds, and internal
temperature. The enclosure can
also be reset to factory default
from this menu.
NOTE: Upon doing a factory
reset, this panel will display
after the display to the left.
Firmware status
The PowerCage 411 enclosure
firmware version.
Power Supply status
The status of power supply #1
and power supply #2 are
(connected) or
Fan speed
The fan speeds for fans #1, #2,
#3, and #4 are displayed in RPMs
(revolutions per minute).
Temperature
The temperature of the enclosure
is displayed in °F and °C.
Factory Reset
To reset the PowerCage 411
enclosure to the factory defaults,
press down the MENU button for
5 seconds.
NOTES:
*Upon doing a factory reset, this panel displays after the display to the left.
•
• The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
on page 58 to change a password).
Frame Status Menu
CN
(not connected).
NC
Figure 18.
FRAME
MENU
STATUS
NEXT
FIRMWARE
MENU
Vx.xx.xxxx
NEXT
POWER SUPPLY
MENU
#1 CN #2 NC
NEXT
FAN#1 FAN#2
MENU
1388 1514
NEXT
FAN#3 FAN#4
MENU
1388 1514
NEXT
TEMPERATURE
MENU
80F 27C
NEXT
FACT. RESET
MENU
HOLD MENU
if reset
NEXT
FRAME STATUS MENU Flowchart
Passwords Panel
PowerCage 411 Series • Operation
VIEW COMM
SETTINGS MENU
FACT. RESET
RESETTING
*See the Note below.
25