Extron electronics PowerCage 411 Series User Manual page 49

Command
PowerCage 411 Enclosure Commands Continued
Status continued
View internal temp
Query all firmware version
Query model name
Query model description
Request enclosure status
X2@
KEY:
= Voltage
X2#
= Temp
X2$
= Fan speed
X2%
= Power supply LED #1
X2^
= Power supply LED #2
X2(
= Internal temperature
X3^
= Firmware version number
X3&
= Verbose firmware version
FOX3 PC Transmitter Commands
Video mute
Mute output video only
Mute output video and sync
Unmute output
View mute status
X4!
KEY: = Video mute
Audio mute — Digital Output, Return or Analog Audio Out
Enable Audio mute
Example:
Disable audio mute
Example:
View audio mute status
NOTE: To view audio mute status, digital audio status and analog audio status must be viewed individually.
X4@
KEY: = Audio output
X4#
= Audio mute status
ASCII Command Response
(host to PowerCage) (PowerCage to host)
E } X2(]
20Stat
20Stat
Verbose mode 2/3
0Q/q
X3^
Verbose mode 2/3
Ver00*
1I/i
PowerCage
Verbose mode 2/3
Inf01*PowerCage
2I/i
Modular
Verbose mode 2/3
Inf02*Modular
S/s X2@ • X2@ • X2# • X2$ • X2$ • X2$ • X2$ • X2% • X2^]
Verbose mode 2/3
Sts
Positive or negative voltage and magnitude
Degrees in F (Example: xxxF)
Revolutions per minute (RPM)
0 = Failed (red), 1 = On (green),
0 = Failed (red), 1 = On (green),
Degrees Fahrenheit and Celsius (xxx.xF
To second decimal place (x.xx)
Description, upload date and time.
1B/b
Vmt1
2B/b
Vmt2
0B/b
Vmt0
B/b
X4!
Verbose mode 2/3
Vmt
0 = Unmute (default)
X4@
*1Z Amt
1*1Z Amt1*1
X4@
*0Z Amt
3*0Z
Amt3*0
X4@ X4#
Z
Verbose mode 2/3
Amt
1 = Digital out (Loop Out ),
0 = Unmute (default)
PowerCage 411 Series • SIS Configuration and Control
Additional Description
• X2(]
X3& X3&] Detailed status of the enclosure firmware
- -
and any firmware upgrade. The active
X3^ X3& X3&]
- -
firmware is marked by an asterisk (*). ???
indicates firmware is not loaded.
]
• 411
]
411
•
PowerCage Enclosure
• •
• PowerCage • Enclosure
X2@ • X2@ • X2# • X2$ • X2$ • X2$ • X2$ • X2% • X2^]
2 = No AC (orange),
2 = No AC (orange),
•
xx.xC)
]
]
]
Default
]
X4!
]
1 = Mute video only
X4@
]
*1
]
Digital audio (embedded on HDMI output)
is muted; analog audio is unaffected.
X4@
]
*0
]
Default. Both audio outputs are active.
]
X4#
]
2 = Analog
1 = Mute
]
]
3 = Not Connected
3 = Not Connected
2 = Mute video and sync
41