Table of Contents
Advertisement
Configuration
Software
The Extron Product Configuration Software (PCS) offers another way to control and
configure the PowerCage 411 enclosure via USB or TCP/IP connection. This section
describes the software installation and communication. For detailed information about
configuring the device with PCS, see the PowerCage 411 Series PCS Help File. Topics in
this section include:
•
•
•
Software/Firmware Installation
Visit
NOTES:
1.
Figure 23.
2.
3.
Software/Firmware Installation
Connecting to PCS
Software Overview
www.extron.com
to download and install the PCS software.
Also download the latest versions of software and firmware for your product.
•
•
An Extron Insider account is required to download and use PCS. Contact an Extron
support representative, to obtain an Insider Account.
Mouse over the Download tab (see figure 24
Download Center Page on the Extron Website
Click the appropriate link on the drop-down list.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
to
step 6
on page 46.
For firmware, click the Firmware link (
If there is no direct link to your software, click the Software link (
).
1
) or, if the software is listed, click
2
).
4
PowerCage 411 Series • Configuration Software
) and skip
3
).
2
45
45
Advertisement
Table of Contents
