Battery Replacement - Kontron ZINC CUBE C232 User Manual

8.1.6. Battery Replacement

If the server no longer automatically displays the correct date and time, you might need to replace the battery that
provides power to the real-time clock.
The computer contains an internal lithium manganese dioxide, a vanadium pentoxide,
or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly
handled. To reduce the risk of personal injury:
To remove the component:
1. Power down the server.
2. Remove all power:
3. Disconnect each power cord from the power source.
4. Disconnect each power cord from the server.
5. If installed, remove the secondary PCIe riser cage.
6. Locate the battery.
7. Remove the battery.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized
service provider.
www.kontron.com
 Do not attempt to recharge the battery.
 Do not expose the battery to temperatures higher than 60°C (140°F).
 Do not disassemble, crush, puncture, short external contacts, or dispose of in
fire or water.
 Replace only with the spare designated for this product.
ZINC CUBE C232 - Rev. 1.0
// 81