Installing A Memory Module; Figure 33: Installing A Memory Module - Kontron ZINC CUBE C232 User Manual

4.17.2. Installing a Memory Module

The system board includes 2 DIMM slots for the installation of DDR4 2133/2400 MHz memory.
To install a memory module:
1. Pull the locking latches of the DIMM slot outward.
2. Place the memory module into the socket so the notch and obstruction are aligned.
3. Press the edge connector of the memory module into the slot.
Press down firmly so that the locking latches of the DIMM slot are levered upward to secure the memory module.

Figure 33: Installing a Memory Module

4. Repeat for the additional memory modules.
5. Install the system board tray.
6. Install the top cover.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 48