Figure 49: Firmware Update; Figure 50: Select Hpm Or Ami; Figure 51: Enter Update Mode - Kontron ZINC CUBE C232 User Manual

6.1.6.4. Updating BMC via a WebGUI
To update BMC using the WebGUI:
1. Log into the WebGUI using a web browser.
Select the Firmware Update menu and click the Firmware Update button.
2.

Figure 49: Firmware Update

Select HPM or AMI. Then click Continue.
3.

Figure 50: Select HPM or AMI

By default, all configuration items will be overwritten while firmware Update. If you want to change the specific
configuration that needs to be preserved, please click Enter Preserve Configuration button to configure. If not,
please click Enter Update Mode button.

Figure 51: Enter Update Mode

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 64