System Board Trays; Removing A System Board Tray; Figure 20: Removing A Board Tray - Kontron ZINC CUBE C232 User Manual

4.11. System Board Trays

4.11.1. Removing a System Board Tray

To remove a system board tray:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove the top cover.
3. Remove the screws securing the system board tray and the chassis.
4. Pull the system board out a little and then disconnect all the cables from the system board.
5. Remove the system board tray.

Figure 20: Removing a Board Tray

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 35