After you click the Enter Update Mode button, please click Browse... button to select the firmware
4.
image to flash. If the file is invalid, a message from webpage window will notify you. If the file is valid,
click Upload button.
Figure 52: Click Update
Select checkbox Version Compare Flash or Full Flash, click Proceed button to start the actual upgrade
5.
operation, or click Cancel button, the process will be terminated. After upgrade successfully, the
device will be reset.
Figure 53: Click Proceed
6.
When the upgrade is completed, the device will reset automatically.
Figure 54: Device has been reset
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 65