Installing A System Board Tray; Figure 21: Installing A System Board Tray - Kontron ZINC CUBE C232 User Manual

4.11.2. Installing a System Board Tray

To prevent damage to the system board, do not force the system board assembly into
the chassis.
To install a system board tray:
1. Align the system board assembly with the chassis bay. Make certain the system board components
are clear of the chassis when installing the system board.
2. Slide the system board into the chassis a little. Connect all the cables to the system board, and then
slide the system board assembly into the chassis. Make sure the system board assembly is flush
with the chassis.
3. Secure the system board tray and the chassis with screws.

Figure 21: Installing a System Board Tray

1. Install the top cover.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 36