Memory Modules; Removing A Memory Module; Figure 32: Removing A Memory Module - Kontron ZINC CUBE C232 User Manual

4.17. Memory Modules

4.17.1. Removing a Memory Module

The system board includes two DIMM slots for the installation of DDR4 2133/2400 MHz memory.
To remove a memory module:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove top cover.
3. Remove the system board tray.
4. Push the locking latches of the DIMM slot downward and outward to eject the memory module.
5. Remove the memory module.

Figure 32: Removing a Memory Module

6. Repeat the process for the additional memory modules.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 47