Entering The Pop-Up Boot Menu; Entering Pxe Boot; Entering The Bios Setup Menu; Table 18: System Event Log (Post) - Kontron ZINC CUBE C232 User Manual

Table 18: System Event Log (POST)

Sensor Sensor
Name Type
BIOS 0x0F
POST
Sensor
0x0F
0x0F
0x07
0x10

6.2.3. Entering the Pop-up Boot Menu

To enter the pop-up boot menu, press F11 during system boot when the Press F11 to enter Popup Boot Menu
message displays.
The pop-up boot menu screen displays as shown in the following figure.

Table 19: Select Boot Device

6.2.4. Entering PXE Boot

To access PXE boot:
Set Network Option ROM execution order in the BIOS setup menu.
1.
2. Set Network as the first boot device in the BIOS setup menu.
3. Select Network device from the pop-up boot menu.

6.2.5. Entering the BIOS Setup Menu

The BIOS setup menu is accessible using the following method:
 Connect a USB keyboard, mouse, and VGA monitor directly to the server.
www.kontron.com
Sensor E/R Event
Number Type Data1
0x09 0x6F 0xC0
0x6F 0xC0
0x6F 0xC0
0x6F 0x02
0x6F 0x04
Event Event Description
Data2 Data3
0x01 0xFF System firmware error. No
system memory is physically
installed in the system.
0x02 0xFF System firmware error. No
usable system memory, all
installed memory has
experienced an unrecoverable
failure.
0x0A 0xFF System firmware error. No
video device detected.
0xFF 0xFF FRBI/BIST failure.
0xFF 0xFF SEL full.
ZINC CUBE C232 - Rev. 1.0
// 68