Installing A System Board Module; Figure 42: Installing A System Board Module - Kontron ZINC CUBE C232 User Manual

4.20.2. Installing a System Board Module

To install a system board module:
1. Align the I/O ports on the system board with the slots on the system board tray.
2. Slide the system board into position. Make sure the I/O ports are seated correctly.
3. Lower the system board onto the system board tray. Make sure the screw holes on the system board
and system board tray are aligned.
4. Install the USB cover onto the system board.
5. Secure the system board to the system board tray with screws.

Figure 42: Installing a System Board Module

6. Install the processor.
7. Install the heat sink.
8. Install the memory modules.
9. Install the M.2 card.
10. Install the SATADOM.
11. Install the system board tray.
12. Connect the cables to the system board.
13. Install the top cover.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 55