Rear Plates; Removing A Rear Plate; Figure 22: Removing A Rear Plate - Kontron ZINC CUBE C232 User Manual

4.12. Rear Plates

4.12.1. Removing a Rear Plate

To remove a rear plate:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove the top cover.
3. Remove the system board tray.
4. Remove the screws securing the rear plate and the chassis.
5. Remove the rear plate.

Figure 22: Removing a Rear Plate

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 37