System Fan Modules; Removing A System Fan Module; Figure 24: Removing A Fan Module - Kontron ZINC CUBE C232 User Manual

4.13. System Fan Modules

4.13.1. Removing a System Fan Module

To remove a system fan module:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove the top cover.
3. Remove the system board tray.
4. Remove the rear plate.
5. Remove the screws securing the system fan module and the rear plate.
6. Remove the system fan module.

Figure 24: Removing a Fan Module

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 39