The default configuration should be selected when SDR is changed.
6.1.6.2. BMC FW Version
The "Get Device ID" command (NetFn Application, Command 1) reports the firmware revision. The "Get
Device ID" command also reports the auxiliary firmware revision.
6.1.6.3. Updating BMC using Linux
To update BMC using Linux:
1.
Log into Linux.
2.
Open the terminal.
3.
Create new directory "/work", command:
mkdir /work
4.
Copy the BMC FW package to the /work directory using the command:
cp file_name.zip /work
5.
Enter directory using the /work, command:
cd /work
6.
Uncompress the BMC FW package using the command:
upzip file_name.zip
Figure 47: Linux Terminal
7.
Enter directory of uncompressed before, command:
cd file_name/Linux/Linux_x86_64
8.
Add execute permission for file_name, command:
chmod 777 *
Execute ./update.sh to update BMC.
9.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 62