Table of Contents
Advertisement
3/ Operations
3.1. Powering up the Server
The following procedure assumes that at least one power cord is connected to the server to supply power to the
server and that the server has been previously powered on.
1.
Verify the power cord.
2.
Power up the server
•
Local server power-on: Press and release the power button on the front control panel of the
server to power on the server.
•
BMC web interface power-on: Log in to the BMC web interface and select power on from the
power control action list box.
•
Log in to the BMC CLI and execute the IPMI command to power on system.
3.2. Powering down the Server
The following procedures display how to shut down the server and verify the power status.
3.2.1. Shutting down the Server
3.2.1.1. Graceful Shutdown
To perform a graceful shutdown: Save all open files, network service, and close all applications prior to shut
down.
Stop or terminate all necessary system processes to bring down the operating system and power off the
compute node.
Press and release the power button on the front panel of ACPI-enabled (Advanced Configuration and Power
Interface) operating systems to perform the operating system instructions (hibernation or orderly
shutdown).
3.2.1.2. Emergency Shutdown
All applications and files will be closed without saving changes, file system corruption
might occur.
To perform an emergency shutdown, press and hold down the power button on the front panel for at least five
seconds to shut down and enter show down mode.
3.2.1.3. BMC CLI Shutdown
Log in to the BMC and execute the IPMI command to shut down the server.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 23
Advertisement
Table of Contents
Troubleshooting
