Removing A 3.5" Hdd Module; Figure 13: Removing A 3.5" Module - Kontron ZINC CUBE C232 User Manual

4.6. Removing a 3.5" HDD Module

To remove a 3.5" HDD module:
1. Open the front panel.
2. Remove the HDD assembly from the chassis.
3. Remove the screws securing the HDD from the HDD carrier.
4. Remove the HDD from the HDD carrier.

Figure 13: Removing a 3.5" Module

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 28