Power Supply Units; Removing A Power Supply Unit; Figure 26: Removing A Power Supply - Kontron ZINC CUBE C232 User Manual

4.14. Power Supply Units

4.14.1. Removing a Power Supply Unit

To remove a power supply unit:
1. Power off the server, and then detach the power cord from the power supply.
2. Remove the top cover.
3. Remove the system board tray.
4. Remove the rear plate.
5. Slide and remove the power supply unit.

Figure 26: Removing a Power Supply

www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 41