3. INSTALLATION
3.3 Installation direction and clearances
CAUTION
(1) When one block is installed
40 mm or more
10 mm
or more
40 mm or more
(2) When two or more blocks are installed
10 mm
or more
Note. Close mounting is possible.
The equipment must be installed in the specified direction. Otherwise, it may
cause a malfunction.
Maintain specified clearances between the module and the inner surfaces of a
control cabinet or other equipment. Otherwise, it may cause a malfunction.
Cabinet
40 mm or more
Wiring allowance
80 mm or more
10 mm
or more
Cabinet
40 mm or more
(Note)
3 - 7
Cabinet
Top
10 mm
or more
Bottom
Top
Bottom