Mitsubishi Electric MELSERVO MR-MT2010 Instruction Manual page 190

9. PARAMETERS
No. Symbol
PC37 *HDI5 Head module DI5 (CN2-15) setting
Set a function for the head module input signal DI5 (CN2-15). This parameter is
enabled only for the first axis of one block. The setting is not valid for the other
axes.
Setting digit
PC38 *HDI6 Head module DI6 (CN2-3) setting
Set a function for the head module input signal DI6 (CN2-3). This parameter is
enabled only for the first axis of one block. The setting is not valid for the other
axes.
Setting digit
PC39 *HDI7 Head module DI7 (CN2-16) setting
Set a function for the head module input signal DI7 (CN2-16). This parameter is
enabled only for the first axis of one block. The setting is not valid for the other
axes.
Setting digit
PC40 *HDI8 Head module DI8 (CN2-4) setting
Set a function for the head module input signal DI8 (CN2-4). This parameter is
enabled only for the first axis of one block. The setting is not valid for the other
axes.
Setting digit
Name and function
_ _ _ x Polarity selection
Select a polarity for the input signal.
0: Positive polarity
1: Negative polarity
_ _ x _ For manufacturer setting
_ x _ _
x _ _ _
_ _ _ x Polarity selection
Select a polarity for the input signal.
0: Positive polarity
1: Negative polarity
_ _ x _ For manufacturer setting
_ x _ _
x _ _ _
_ _ _ x Polarity selection
Select a polarity for the input signal.
0: Positive polarity
1: Negative polarity
_ _ x _ For manufacturer setting
_ x _ _
x _ _ _
_ _ _ x Polarity selection
Select a polarity for the input signal.
0: Positive polarity
1: Negative polarity
_ _ x _ For manufacturer setting
_ x _ _
x _ _ _
Explanation
Explanation
Explanation
Explanation
9 - 103
Initial value
[Unit]
Refer to the Name and
function column.
Initial value
0h
0h
0h
0h
Refer to the Name and
function column.
Initial value
0h
0h
0h
0h
Refer to the Name and
function column.
Initial value
0h
0h
0h
0h
Refer to the Name and
function column.
Initial value
0h
0h
0h
0h
Setting
range