Mitsubishi Electric MELSERVO MR-MT2010 Instruction Manual page 5

(3) Test run and adjustment
Before operation, check and adjust the parameter settings. Improper settings may cause some machines
to operate unexpectedly.
(4) Usage
Immediately turn off the power if smoke, unusual noise, or strange odor is emitted from the sensing
module.
Do not disassemble, repair, or modify the equipment.
Burning or breaking a sensing module may cause a toxic gas. Do not burn or break it.
Connect the sensing module to the specified controller.
(5) Corrective actions
Ensure safety by confirming the power off, etc. before performing corrective actions. Otherwise, it may
cause an accident.
When an alarm occurs, eliminate its cause, ensure safety, and deactivate the alarm to restart operation.
Provide an adequate protection to prevent unexpected restart after an instantaneous power failure.
(6) Maintenance, inspection and parts replacement
Do not touch the connector contacts.
It is recommended that the sensing module be replaced every 10 years when it is used in general
environment.
When using the sensing module that has not been energized for an extended period of time, contact your
local sales office.
(7) General instruction
To illustrate details, the equipment in the diagrams of this Instruction Manual may have been drawn
without covers and safety guards. When the equipment is operated, the covers and safety guards must
be installed as specified. Operation must be performed in accordance with this Instruction Manual.
CAUTION
CAUTION
CAUTION
CAUTION
A - 4